Quick Reference Guide
Quick Reference Guide
Find an instructional video here: Bag Assembly Video
Installation Instructions:
- Match up inserts with foam side out and hard plastic side in. Set aside.
- Open the internal side pocket.
- Bend (do not fold) the insert in half and place it inside the bag.
- Install the bottom end of the panel first all the way into the internal side pocket. Then flex the insert and slip the top part into the top end of the pocket.
- Secure the pocket velcro while pushing out on the inserts, and confirm it’s nice and tight all the way down.
- Once installed, please follow the recommended break-in.
| Bag model | Expandable pocket | Water bottle pocket | Main compartment capacity | Top pocket capacity | Flap pocket capacity | Slip sleve | Velcro loop field | Rain cover compatible |
| AX5 | yes | yes | 22 | 4 | yes/1 | yes | yes | XL |
| BX3 | yes | yes | 18 | 3 | no | no | yes | XL |
| CX1 | yes | yes | 16 | 3 | no | no | yes | X |
| CS2 | no | yes | 14 | 2 | no | no | yes | L |
| G2 | n/a | yes | 8-12 | 2 | yes/1 | no | yes | n/a |
| G-series | n/a | yes | 8-12 | 2 | yes/1 | no | no | n/a |
- Padded lumbar pocket
-
- YKK Zippers
- Nylon Duraflex Woojin Hardware
- Double Layer 1000D/420 D Nylon Construction
| AX5 | BX3 | CX1 | CS2 | G2 | G-Series |
| 21″ tall 20″ wide closed 24″ wide expanded 9.5″deep AX5 main compartment height – 15.75″ |
20″ tall 17″ wide closed 21″ wide expanded 9.5″deep BX3 main compartment height – 15″ BX3 side pocket height – 15″ |
20″ tall 15″ wide closed 19″ wide expanded 9.5″deep |
20″ tall 13″ wide closed 9.5″deep |
14″ tall 12″ wide closed 8″deep |
14″ tall 12″ wide closed 8″deep |
The installed inserts are a bit concave to avoid having them bow outward when the bag is full and must be broken in evenly to maintain appropriate structure. Be sure to keep it loaded with the full complement of discs and if you single shoulder carry, switch shoulders often to even out wear on the inserts over time. Alternatively, you can can flip your discs to face the opposite direction in the main compartment of the bag.We recommend hanging a new bag when not in use – this helps break in the inserts and increases capacity, usually by 2-3 discs once the bag is fully broken in.
Please inspect all shipments immediately upon arrival. For damage due to shipping or defective product, please contact reseller@grip-eq.com within five (5) business days. GRIPeq will, after evaluation and at our discretion, provide a replacement or refund.
Resellers are welcome to match GRIPeq’s marketing discounts, which we publish on our social media outlets.
Online sales are not permitted. GRIPeq bags and products can be advertised and viewed online (including reseller websites and social media channels) but must be purchased in-store.
Customers can locate information about registering their bags at https://grip-eq.com/support/register-warranty/
Please give customers a receipt to confirm the purchase of the bag; they must retain this receipt to register their bag with GRIPeq’s warranty program.
Customers should file a claim at grip eq.com/support/register-warranty/. GRIPeq will work directly with customers to process warranty claims.
Returns are not permitted except in the case of product defect or damage. All reseller purchases are final.
Typically orders will ship within two (2) business days. GRIPeq’s fulfillment center is open M-F. During high-volume times, resellers may experience a delay in shipping.
GRIPeq supports the disc golf community through donations of products. Events, in general, should meet the following criteria, but we make acceptions for Resellers.
- The event has been held 2+ years in a row
- 72 or more players are participating
- You are willing to post promote GRIPeq as a sponsor/partner at the event and on various platforms where applicable (i.e. websites, programs, flyers, etc.), as well as tag GRIPeq on social media.
Please fill out an application for your event here: GRIPeq Event Sponsorship Application
